Applications-Jiangyin Xiaole Electromechanical Co., Ltd.

Automotive interior parts

The injection station is installed on the non-operating side of the Wintec 1300 machine. The color of the sheet metal is uniform and the overall sense is strong. It is mainly used for the second TPE encapsulation of the car door handles produced by the host, and the defective product rate is below 3‰. Compared with the molding cycle, the secondary encapsulation process has increased by 30%, which has improved production efficiency and reduced energy consumption.

Perfume bottle cap

The injection station is installed on the top side of the moving plate of the K-Tec200 machine. The color of the sheet metal is uniform and the overall feeling is strong. It mainly performs integrated injection molding of the high transparent part of the perfume bottle cap. The finished product requires high transparency and no shrinkage lines. According to the customer's process It is required to optimize the injection and storage curves, stabilize the screw speed, maintain the holding pressure, and ensure the yield rate.

Shower gel lid

The injection station is installed on the top side of the fixed plate of the KM550 machine. The color of the sheet metal is uniform and the overall sense is strong. The transparent and colored part of the shower gel cover is mainly injected into one body. The finished product requires high transparency and uniform color. The injection and storage are optimized according to customer process requirements. The material curve improves the mixing effect of the screw, controls the signal interaction with the masterbatch machine, and combines the equipment's multi-stage material storage technology to improve the yield rate.

Car light system

The injection platform is installed on the non-operating side of the Engel Duo800 machine. The color of the sheet metal is uniform and the overall sense is strong. It mainly performs integrated injection molding of the most critical light guide of the car lamp. The finished product has high light transmittance requirements and low distortion rate. According to the customer's process It is required to optimize the injection curve, reduce the holding pressure, reduce the impact of the mold, shorten the molding cycle, and greatly improve the yield rate.

Medical supplies

The injection station is installed on the top side of the moving plate of the Elektron275 machine. The color of the sheet metal is uniform and the overall sense is strong. It mainly performs co-injection molding on both sides of the consumable. The finished product has high size requirements. All manipulators are automatically assembled. According to the process requirements of the host, self-learning and matching injection And the storage curve improves the consistency of the product and guarantees the yield of the assembly parts.

Milk powder lid

The injection station is installed on the non-operating side of the Zhafir360 machine. The color of the sheet metal is uniform and the overall feeling is strong. It is mainly used for the integrated injection molding of the latest lid and spoon of the milk powder lid. The upper and lower lids can be opened and closed freely, and they need to be sealed after being closed. The size of the finished product is required. High, uniform color, according to customer process requirements, optimize the injection and storage curves, improve product consistency, shorten the molding cycle, and increase the yield rate.

Milk powder lid

The injection station is installed on the non-operating side of the Zhafir360 machine. The color of the sheet metal is uniform and the overall feeling is strong. It is mainly used for the integrated injection molding of the latest lid and spoon of the milk powder lid. The upper and lower lids can be opened and closed freely, and they need to be sealed after being closed. The size of the finished product is required. High, uniform color, according to customer process requirements, optimize the injection and storage curves, improve product consistency, shorten the molding cycle, and increase the yield rate.

Milk powder lid

The injection station is installed on the non-operating side of the Zhafir360 machine. The color of the sheet metal is uniform and the overall feeling is strong. It is mainly used for the integrated injection molding of the latest lid and spoon of the milk powder lid. The upper and lower lids can be opened and closed freely, and they need to be sealed after being closed. The size of the finished product is required. High, uniform color, according to customer process requirements, optimize the injection and storage curves, improve product consistency, shorten the molding cycle, and increase the yield rate.